Balancer cone – Range: of 3.375″-5.25″
Fits the following wheel balancer brands:
Fits: Hunter, Coats, Sunrise, Nationwide, Ranger, Ammco, Hoffman, Corghi, Cemb, K&L And many more. (Shaft size may vary per machine)
Interchangeable Part Numbers:
WB725-40, TMRWB725-40
28mm Shaft Models -Accuturn – 5100, 5223, 5500, 5600 (Serial #51-0001 To 51-0622)Coats – 700, 800, 825, 850, 925, 950, 1000. 1025, 1050 And 1250 IBS2000 (Shaft Must Be Verified 28mm) And 6200HSMondolfo Ferro – All Models Excluding Truck BalancersNorton – All ModelsSnap-On – Shafts Must Be Verified 28mmSun – 1742 And 1762
36mm Shaft Models -Accuturn – 6100, 6600, 6800Cemb – Pre 1995 ModelsCoseng – C301, C311, C322, C366Launch – 402, 412Ranger – All Models
40mm Shaft Models -Accuturn – 1200, 1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650, 1820, 1850 (5100, 5323, 5500, 5600 With Serial #s 51-0623 To 51-1457)Bear – 80-100, 80-303Beisbarth – All ModelsBosch – All ModelsCEMB – All Models 1995 And Later, (Excluding Truck Models)Coats – (Previously Upgraded to 40mm Shafts) 700, 800, 825, 850, 925, 950, 1000, 1025, 1050, 1055, 1250, IBS 2000 (Shaft Must Be Verified 40mm), 1750, 1800, 1850, 775, 875, 1175, 6275HS, XR BalancersCorghi – All Models 2007 And LaterFMC – All ModelsHofmann – All ModelsHunter – All ModelsJohn Bean – All ModelsKwikway – All ModelsLaunch – 408, 500Snap-On – Shaft Must Be Verified 40mmSicam – All Models
Insights:
When selecting a cone, the range is determined by the center bore on the wheel you are trying to balance. For example, if your wheel center hole is 3″ in diameter, make sure that 3″ is within the range of the cone you are purchasing. ALL wheel balancers have one of four shaft diameters: 28mm, 36mm, 38mm, or 40mm. This determines the center bore of your cone for mounting on your machine. Use the above machine information for selecting the correct size.
Interchangeable Part Numbers:
TMRWB725-28; TMRWB725-36; TMRWB725-38; TMRWB725-40; WB725-28;
WB725-36; WB725-38; WB725-40
Made in the U.S.A.